Blu-Sub Subsea M10 Tap Switch (Non-Latching)
Blu-Sub Mechatronics
- Manufacturer
- Blu-Sub Mechatronics
- Part number
- Confirmed on enquiry
- Category
- Switches & Potentiometers
Subsea M10 Tap Switch (Non-Latching)
A compact, depth-rated momentary switch using a magnetic mechanical design (not Hall-effect or pressure-based) for consistent triggering across its operating range. It conducts when tapped and disconnects on release, suited to signaling inputs for microcontrollers or low-current logic in subsea systems.
Specifications
| Product type | Push switch |
| Depth Rating | 1,000 m (3,280 ft) |
| Mounting | M10 bulkhead-style thread |
| Material | Black anodized aluminum |
| O-ring | 12 x 1.5 mm, FKM75 fluorine rubber |
| Electrical Rating | 0.5 A @ 125 VAC (varies by DC voltage) |
| Wire | 24 AWG, ~200 mm, blue/green |
| Button Travel | ~1 mm |
| Temperature Range | -10 to 70 C |
| Design Lifetime | 3 years or 500 cycles |
Figures above are Blu-Sub Mechatronics published specifications as held in the Vebix Automation catalogue. Hardware revisions change them, so confirm them against the datasheet for the exact part number quoted. The manufacturer's full specification is at Blu-Sub Mechatronics's own listing (opens in a new tab).
Applications
Momentary input signaling for remote-operated lighting, thrusters, and human-machine interfaces in ROVs and AUVs.
Compatible accessories
Toggle Relay Control Module (for latched on/off behavior), subsea enclosures, M10 Coupling Tube, Universal M8/M10 Installation Wrench.
Manufacturer reference
View manufacturer specifications and documentation (opens in a new tab). Check the exact variant and document revision when specifying this part.
Common questions
What is its depth rating?
1,000 m (3,280 ft).
What is it made from?
Black anodized aluminum.
What is its temperature range?
-10 to 70 C.
How is it mounted?
M10 bulkhead-style thread.
What service life is the Blu-Sub Subsea M10 Tap Switch (Non-Latching) rated for?
3 years or 500 cycles.
Can I get the datasheet and drawings?
Yes. The Blu-Sub Mechatronics datasheet and any drawings we hold for the Blu-Sub Subsea M10 Tap Switch (Non-Latching) are sent on request -- ask for them with your enquiry and we will attach them to the reply.
How do I order this in India?
Vebix Automation is an authorised Blu-Sub Mechatronics distributor and supplies the Blu-Sub Subsea M10 Tap Switch (Non-Latching) across India from Pune. Pricing, stock, lead time and the manufacturer datasheet are confirmed on enquiry.
More in Switches & Potentiometers
All Switches & Potentiometers in the catalogue →Goes with this
Other parts in this category. These are not alternatives to the part above — they are what it is installed alongside.
Get a quote for this product
Tell us the quantity and delivery location. We will confirm pricing, stock and lead time, and can help with the datasheet and compatibility.
Availability & support
Contact us for exact pricing, stock and lead time. Supplied and supported across India by Vebix Automation, an authorised Blu-Sub Mechatronics distributor, with technical support through selection, integration and after delivery. The manufacturer datasheet for this product is available on request.
Compare push switches
Manufacturer specifications for the parts this one is an alternative to, side by side. A dash means a figure is not listed in our catalogue, not zero. Check the exact variant and operating conditions before choosing.
| Product | Depth Rating | Material | Product type | Design Lifetime | Electrical Rating |
|---|---|---|---|---|---|
| Subsea M10 Tap Switch (Non-Latching) this page | 1,000 m (3,280 ft) | Black anodized aluminum | Push switch | 3 years or 500 cycles | 0.5 A @ 125 VAC (varies by DC voltage) |
| Subsea Embedded Push Button Switch (Non-Magnetic) (BS-SSC-EPBSW-SSX-10A1) | 100 m (328 ft) | 316 stainless steel (non-magnetic) | Push switch | 3 years or 3,000 cycles | Max 50 mA @ 12 VDC; min 10 uA @ 1 VDC |