Blu-Sub Subsea Embedded Push Button Switch (Non-Magnetic) (BS-SSC-EPBSW-SSX-10A1)
Blu-Sub Mechatronics
- Manufacturer
- Blu-Sub Mechatronics
- Part number
- Confirmed on enquiry
- Category
- Switches & Potentiometers
Subsea Embedded Push Button Switch (Non-Magnetic) (BS-SSC-EPBSW-SSX-10A1)
A compact, fully sealed 316 stainless steel push-button switch for underwater control interfaces. It operates as a momentary (tap) switch, conducting only while actuated and self-resetting with no latching. Its non-magnetic construction makes it safe to use near sonar and navigation instruments.
Specifications
| Product type | Push switch |
| Depth Rating | 100 m (328 ft) |
| Thread Size | M12 x 0.75 |
| Material | 316 stainless steel (non-magnetic) |
| Weight | 19.8 g |
| O-ring Size | 12 x 1 mm |
| Button Diameter / Travel | 9 mm diameter; ~1.5 mm travel |
| Electrical Rating | Max 50 mA @ 12 VDC; min 10 uA @ 1 VDC |
| Wire | 24 AWG, ~200 mm |
| Temperature (Water) | -4 to 40 C |
| Design Lifetime | 3 years or 3,000 cycles |
Figures above are Blu-Sub Mechatronics published specifications as held in the Vebix Automation catalogue. Hardware revisions change them, so confirm them against the datasheet for the exact part number quoted. The manufacturer's full specification is at Blu-Sub Mechatronics's own listing (opens in a new tab).
Applications
Manual input control for underwater lights, pumps, solenoids, and sealed enclosure interfaces, especially where magnetic interference must be avoided (e.g. near sonar/compass).
Compatible accessories
Toggle Relay Control Module (adds latching behavior and long-press shutdown), O-Ring Lubricant (MOLYKOTE 111 Compound).
Manufacturer reference
View manufacturer specifications and documentation (opens in a new tab). Check the exact variant and document revision when specifying this part.
Common questions
What is its depth rating?
100 m (328 ft).
How much does it weigh?
19.8 g.
What is it made from?
316 stainless steel (non-magnetic).
What thread does it use?
M12 x 0.75.
What service life is the Blu-Sub Subsea Embedded Push Button Switch (Non-Magnetic) (BS-SSC-EPBSW-SSX-10A1) rated for?
3 years or 3,000 cycles.
Can I get the datasheet and drawings?
Yes. The Blu-Sub Mechatronics datasheet and any drawings we hold for the Blu-Sub Subsea Embedded Push Button Switch (Non-Magnetic) (BS-SSC-EPBSW-SSX-10A1) are sent on request -- ask for them with your enquiry and we will attach them to the reply.
How do I order this in India?
Vebix Automation is an authorised Blu-Sub Mechatronics distributor and supplies the Blu-Sub Subsea Embedded Push Button Switch (Non-Magnetic) (BS-SSC-EPBSW-SSX-10A1) across India from Pune. Pricing, stock, lead time and the manufacturer datasheet are confirmed on enquiry.
More in Switches & Potentiometers
All Switches & Potentiometers in the catalogue →Goes with this
Other parts in this category. These are not alternatives to the part above — they are what it is installed alongside.
Get a quote for this product
Tell us the quantity and delivery location. We will confirm pricing, stock and lead time, and can help with the datasheet and compatibility.
Availability & support
Contact us for exact pricing, stock and lead time. Supplied and supported across India by Vebix Automation, an authorised Blu-Sub Mechatronics distributor, with technical support through selection, integration and after delivery. The manufacturer datasheet for this product is available on request.
Compare push switches
Manufacturer specifications for the parts this one is an alternative to, side by side. A dash means a figure is not listed in our catalogue, not zero. Check the exact variant and operating conditions before choosing.
| Product | Depth Rating | Material | Product type | Design Lifetime | Electrical Rating |
|---|---|---|---|---|---|
| Subsea Embedded Push Button Switch (Non-Magnetic) (BS-SSC-EPBSW-SSX-10A1) this page | 100 m (328 ft) | 316 stainless steel (non-magnetic) | Push switch | 3 years or 3,000 cycles | Max 50 mA @ 12 VDC; min 10 uA @ 1 VDC |
| Subsea M10 Tap Switch (Non-Latching) | 1,000 m (3,280 ft) | Black anodized aluminum | Push switch | 3 years or 500 cycles | 0.5 A @ 125 VAC (varies by DC voltage) |