Vebix

Blu-Sub Deep-Sea M10 Gland Cable Penetrator Subsea Connector

Blu-Sub Mechatronics

Manufacturer
Blu-Sub Mechatronics
Part number
Confirmed on enquiry

A compact, pressure-rated M10 cable pass-through for subsea enclosure walls or end-caps, using o-rings plus a mechanical compression system. A split compression plug and sleeve ring compress around the cable sheath as the locking cap is tightened, giving a removable, re-usable watertight and strain-relieved seal (unlike the epoxy-sealed standard penetrator).

Specifications

Product typeCable penetrator
Depth RatingAluminum: 300 m (984 ft); Stainless Steel: 1,000 m (3,281 ft)
Thread SizeM10 bulkhead port
Weight~15 g (aluminum); ~50 g (stainless steel)
MaterialsBlack anodized 6061 aluminum, or 316 stainless steel
Cable Size Options6 variants, from 5.6x3.4 mm to 8.4x5.9 mm
O-Ring Types#2 black or #3 brown (size-dependent)

Figures above are Blu-Sub Mechatronics published specifications as held in the Vebix Automation catalogue. Hardware revisions change them, so confirm them against the datasheet for the exact part number quoted. The manufacturer's full specification is at Blu-Sub Mechatronics's own listing (opens in a new tab).

Applications

Modular, removable cable feedthroughs for ROVs, custom subsea housings, sensor pods, and camera systems needing deep-water strain relief.

Selection guides

How to choose between the options in this category, and what to check before ordering.

Manufacturer reference

View manufacturer specifications and documentation (opens in a new tab). Check the exact variant and document revision when specifying this part.

Common questions

What is its depth rating?

Aluminum: 300 m (984 ft); Stainless Steel: 1,000 m (3,281 ft).

How much does it weigh?

~15 g (aluminum); ~50 g (stainless steel).

What thread does it use?

M10 bulkhead port.

Which cable is included?

6 variants, from 5.6x3.4 mm to 8.4x5.9 mm.

Can I get the datasheet and drawings?

Yes. The Blu-Sub Mechatronics datasheet and any drawings we hold for the Blu-Sub Deep-Sea M10 Gland Cable Penetrator Subsea Connector are sent on request -- ask for them with your enquiry and we will attach them to the reply.

How do I order this in India?

Vebix Automation is an authorised Blu-Sub Mechatronics distributor and supplies the Blu-Sub Deep-Sea M10 Gland Cable Penetrator Subsea Connector across India from Pune. Pricing, stock, lead time and the manufacturer datasheet are confirmed on enquiry.

Get a quote for this product

Tell us the quantity and delivery location. We will confirm pricing, stock and lead time, and can help with the datasheet and compatibility.

Availability & support

Contact us for exact pricing, stock and lead time. Supplied and supported across India by Vebix Automation, an authorised Blu-Sub Mechatronics distributor, with technical support through selection, integration and after delivery. The manufacturer datasheet for this product is available on request.

Compare cable penetrators

Manufacturer specifications for the parts this one is an alternative to, side by side. A dash means a figure is not listed in our catalogue, not zero. Check the exact variant and operating conditions before choosing.

ProductWeightThread SizeCable Size OptionsProduct type
Deep-Sea M10 Gland Cable Penetrator this page~15 g (aluminum); ~50 g (stainless steel)M10 bulkhead port6 variants, from 5.6x3.4 mm to 8.4x5.9 mmCable penetrator
Low-Depth M10 Gland Cable Penetrator~46 gM106 variants, 5.6x3.4 mm to 8.4x5.9 mmCable penetrator
Mid-Depth M8 Gland Cable Penetrator~8 gCable penetrator
Deep-Sea Cable PenetratorCable penetrator
Request a quotation