Blu-Sub Deep-Sea Cable Penetrator Subsea Connector
Blu-Sub Mechatronics
- Manufacturer
- Blu-Sub Mechatronics
- Part number
- Confirmed on enquiry
- Category
- Cables & Connectors
Deep-Sea Cable Penetrator
Precision-machined threaded bulkhead fittings that create a watertight seal where electrical cables pass through subsea enclosure walls or end-caps. Offered in five thread sizes for different cable diameters, each unit ships with a bulkhead, o-ring, and installation nut, and is intended to be sealed with a marine epoxy for a permanent watertight feedthrough.
Specifications
| Product type | Cable penetrator |
| Included | 1 bulkhead, 1 o-ring, 1 installation nut |
| Depth Rating | Up to 1,000 m (3,281 ft) |
| Material | 6061 aluminum, black anodized |
| Available Sizes | M6x1, M8x1, M10x1, M14x1.5, M16x1.5 |
| Air Temperature | -25C to 60C |
| Water Temperature | -4C to 40C |
| O-ring Material | FKM75 brown fluorine rubber |
| Design Lifetime | Up to 1 year or 100 cycles |
| Dimensions (M10x1) | 20 mm thread length, 18 mm OD, 12x1.5 mm o-ring |
Figures above are Blu-Sub Mechatronics published specifications as held in the Vebix Automation catalogue. Hardware revisions change them, so confirm them against the datasheet for the exact part number quoted. The manufacturer's full specification is at Blu-Sub Mechatronics's own listing (opens in a new tab).
Applications
Permanent, epoxy-sealed cable feedthroughs for ROV/USV enclosures, subsea robotics housings, and deep-sea exploration equipment.
Compatible accessories
Deep-Sea Underwater Cable; Deep-Sea Shielded Data & Power Cable; Subsea aluminum/acrylic end-caps; Subsea enclosure tubes; Universal M8/M10 Installation Wrench; Spare O-Ring Sets; Loctite Marine Epoxy / 3M2131 sealant
Selection guides
How to choose between the options in this category, and what to check before ordering.
Manufacturer reference
View manufacturer specifications and documentation (opens in a new tab). Check the exact variant and document revision when specifying this part.
Common questions
What is its depth rating?
Up to 1,000 m (3,281 ft).
What is it made from?
6061 aluminum, black anodized.
What are its dimensions?
20 mm thread length, 18 mm OD, 12x1.5 mm o-ring.
What service life is the Blu-Sub Deep-Sea Cable Penetrator Subsea Connector rated for?
Up to 1 year or 100 cycles.
Can I get the datasheet and drawings?
Yes. The Blu-Sub Mechatronics datasheet and any drawings we hold for the Blu-Sub Deep-Sea Cable Penetrator Subsea Connector are sent on request -- ask for them with your enquiry and we will attach them to the reply.
How do I order this in India?
Vebix Automation is an authorised Blu-Sub Mechatronics distributor and supplies the Blu-Sub Deep-Sea Cable Penetrator Subsea Connector across India from Pune. Pricing, stock, lead time and the manufacturer datasheet are confirmed on enquiry.
More in Cables & Connectors
Cables & Connectors selection guide & comparison →Goes with this
Other parts in this category. These are not alternatives to the part above — they are what it is installed alongside.
Get a quote for this product
Tell us the quantity and delivery location. We will confirm pricing, stock and lead time, and can help with the datasheet and compatibility.
Availability & support
Contact us for exact pricing, stock and lead time. Supplied and supported across India by Vebix Automation, an authorised Blu-Sub Mechatronics distributor, with technical support through selection, integration and after delivery. The manufacturer datasheet for this product is available on request.
Compare cable penetrators
Manufacturer specifications for the parts this one is an alternative to, side by side. A dash means a figure is not listed in our catalogue, not zero. Check the exact variant and operating conditions before choosing.
| Product | Depth Rating | Material | Product type |
|---|---|---|---|
| Deep-Sea Cable Penetrator this page | Up to 1,000 m (3,281 ft) | 6061 aluminum, black anodized | Cable penetrator |
| Low-Depth M10 Gland Cable Penetrator | 100 m (328 ft) | Copper body, nickel-plated brass construction | Cable penetrator |
| Mid-Depth M8 Gland Cable Penetrator | 300 m (984 ft) | Black anodized aluminum | Cable penetrator |
| Deep-Sea M10 Gland Cable Penetrator | Aluminum: 300 m (984 ft); Stainless Steel: 1,000 m (3,281 ft) | — | Cable penetrator |