Pixhawk 6C Plastic UAV Autopilot
Holybro
- Manufacturer
- Holybro
- Part number
- 11054
- Category
- Autopilot Flight Controllers
Pixhawk 6C Plastic
Holybro Pixhawk 6C is a Pixhawk-family flight controller with an integrated baseboard: compute, sensors and connectors in one housing, ordered as a single part number. This is the plastic-cased version — lighter and lower cost than the aluminium one, and the usual choice on a small aircraft with an uncrowded electronics bay. Supplied in India by Vebix Automation, an authorised Holybro distributor. Contact us for pricing, lead time and the manufacturer datasheet.
Specifications
| Model | Pixhawk 6C |
| Manufacturer | Holybro |
| Holybro SKU | 11054 |
| Product type | Flight controller |
| Product line | Pixhawk 6C (integrated baseboard) |
| Category | Autopilot Flight Controllers |
| Processor | STM32H743, Cortex-M7, 480 MHz, 2 MB flash, 1 MB RAM |
| I/O processor | STM32F103 / Cortex-M3 / 72 MHz / 64 KB SRAM |
| IMU | ICM-42688-P, BMI088 |
| Magnetometer | IST8310 |
| Barometer | MS5611 |
| PWM outputs | 16 (8 I/O + 8 FMU) |
| Serial ports | 3 |
| Flow control on | TELEM1, TELEM2 |
| GPS ports | 2 |
| I2C ports | 1 |
| CAN ports | 2 |
| Analog power inputs | 2 |
| Autopilot power input | 6 V maximum |
| USB input | 4.75-5.25 V |
| Servo rail (pass-through, not a supply input) | 0-36 V |
| Dimensions | 84.8 x 44 x 12.4 mm |
| Baseboard | Integrated |
| Case | Plastic |
| Mass | 34.6 g |
| Operating temperature | -40 to 85 °C |
Figures above are from Holybro's published documentation, read on 2026-09-07: Pixhawk 6C technical specification. Where a figure depends on a hardware revision the row says so; confirm the revision supplied against your order.
Applications
Multirotor, fixed-wing and rover platforms needing a complete autopilot with a fixed connector set and no separate baseboard to specify.
Compatible accessories
Analog power modules such as the PM02 V3, Holybro M10 and H-RTK GNSS receivers, SiK telemetry radios. The aluminium-cased 6C is the same controller in a different housing.
Selection guides
How to choose between the options in this category, and what to check before ordering.
Common questions
What are its dimensions?
84.8 x 44 x 12.4 mm.
What is its temperature range?
-40 to 85 °C.
What is the manufacturer part number?
Holybro lists it as 11054. Quote that number on an enquiry and we will match it exactly.
Can I get the datasheet and drawings?
Yes. The Holybro datasheet and any drawings we hold for the Pixhawk 6C Plastic UAV Autopilot are sent on request -- ask for them with your enquiry and we will attach them to the reply.
How do I order this in India?
Vebix Automation is an authorised Holybro distributor and supplies the Pixhawk 6C Plastic UAV Autopilot across India from Pune. Pricing, stock, lead time and the manufacturer datasheet are confirmed on enquiry.
The rest of the Pixhawk 6C (integrated baseboard) range
More in Autopilot Flight Controllers
Autopilot Flight Controllers selection guide & comparison →Goes with this
Other parts in this category. These are not alternatives to the part above — they are what it is installed alongside.
Get a quote for this product
Tell us the quantity and delivery location. We will confirm pricing, stock and lead time, and can help with the datasheet and compatibility.
Availability & support
Contact us for exact pricing, stock and lead time. Supplied and supported across India by Vebix Automation, an authorised Holybro distributor, with technical support through selection, integration and after delivery. The manufacturer datasheet for this product is available on request.
Compare flight controllers
Manufacturer specifications for the parts this one is an alternative to, side by side. A dash means a figure is not listed in our catalogue, not zero. Check the exact variant and operating conditions before choosing.
| Product | Analog power inputs | Autopilot power input | Dimensions | Product type | Barometer |
|---|---|---|---|---|---|
| Pixhawk 6C Plastic this page | 2 | 6 V maximum | 84.8 x 44 x 12.4 mm | Flight controller | MS5611 |
| Pixhawk 6C Aluminum | 2 | 6 V maximum | 84.8 x 44 x 12.4 mm | Flight controller | MS5611 |
| Pixhawk 6C Mini Model-B | 1 | 6 V maximum | 58.3 x 39 x 18.15 mm | Flight controller | MS5611 |
| Pixhawk 6C Mini Model-A | 1 | 6 V maximum | — | Flight controller | MS5611 |
| Pix32 v6 | — | 6 V maximum | — | Flight controller | MS5611 |
| Pixhawk 6X | — | 6 V maximum | — | Flight controller | — |