Blu-Sub Subsea M10 Depth Sensor (0-30Bar)
Blu-Sub Mechatronics
- Manufacturer
- Blu-Sub Mechatronics
- Part number
- Confirmed on enquiry
- Category
- Sensors
A compact, waterproof depth sensor built around the MS5837-30BA digital pressure chip for underwater applications to 300 m. It has a black anodized aluminum housing with an M10x1 threaded interface and a removable protective cap, and communicates over I2C via a DF13-4S connector. Intended for plug-and-play integration into ROVs, autonomous platforms, and subsea sensor arrays.
Specifications
| Product type | Depth sensor |
| Pressure Range | 0-30 Bar |
| Operating Depth | 0-300 m (0-984 ft) |
| Overpressure Limit | 50 Bar |
| Peak Current | 1.5 mA |
| Voltage | 5 V |
| Output Signal | I2C, 3.3 V logic (address 0x76) |
| Connector | DF13-4S-1.25C, ~300 mm wire |
| Accuracy | +/-200 mbar (relative) |
| Pressure Resolution | 0.2 mbar |
| Thread Size | M10 x 1 |
| Material | Black anodized aluminum |
| Weight | 14 g |
| Operating Temperature | -20 to 85 C |
Figures above are Blu-Sub Mechatronics published specifications as held in the Vebix Automation catalogue. Hardware revisions change them, so confirm them against the datasheet for the exact part number quoted. The manufacturer's full specification is at Blu-Sub Mechatronics's own listing (opens in a new tab).
Applications
Depth measurement for ROVs, underwater drones, AUVs, and embedded subsea sensor systems requiring a compact, low-power solution.
Compatible accessories
Subsea M10 Coupling Tube, Universal M8/M10 Installation Wrench, subsea enclosures (acrylic/aluminum tubes, watertight boxes), spare O-ring sets and O-ring lubricant.
Selection guides
How to choose between the options in this category, and what to check before ordering.
Manufacturer reference
View manufacturer specifications and documentation (opens in a new tab). Check the exact variant and document revision when specifying this part.
Common questions
What is its depth rating?
0-300 m (0-984 ft).
What voltage does it run on?
5 V.
How much does it weigh?
14 g.
What is it made from?
Black anodized aluminum.
What thread does it use?
M10 x 1.
What is its temperature range?
-20 to 85 C.
Can I get the datasheet and drawings?
Yes. The Blu-Sub Mechatronics datasheet and any drawings we hold for the Blu-Sub Subsea M10 Depth Sensor (0-30Bar) are sent on request -- ask for them with your enquiry and we will attach them to the reply.
How do I order this in India?
Vebix Automation is an authorised Blu-Sub Mechatronics distributor and supplies the Blu-Sub Subsea M10 Depth Sensor (0-30Bar) across India from Pune. Pricing, stock, lead time and the manufacturer datasheet are confirmed on enquiry.
More in Sensors
All Sensors in the catalogue →Goes with this
Other parts in this category. These are not alternatives to the part above — they are what it is installed alongside.
Get a quote for this product
Tell us the quantity and delivery location. We will confirm pricing, stock and lead time, and can help with the datasheet and compatibility.
Availability & support
Contact us for exact pricing, stock and lead time. Supplied and supported across India by Vebix Automation, an authorised Blu-Sub Mechatronics distributor, with technical support through selection, integration and after delivery. The manufacturer datasheet for this product is available on request.
Compare depth sensors
Manufacturer specifications for the parts this one is an alternative to, side by side. A dash means a figure is not listed in our catalogue, not zero. Check the exact variant and operating conditions before choosing.
| Product | Operating Depth | Voltage | Weight | Material | Thread Size |
|---|---|---|---|---|---|
| Subsea M10 Depth Sensor (0-30Bar) this page | 0-300 m (0-984 ft) | 5 V | 14 g | Black anodized aluminum | M10 x 1 |
| Subsea M14 Metal Diaphragm Depth Sensor (0-35Bar) | 0-350 m (0-1,148 ft) | 5 V | 82 g | Stainless steel | M14 x 1.5 |
| Subsea M8 Depth Sensor (0-30 Bar / 0-300 m) | 0-300 m (0-984 ft) | 5 V | 10 g | Anodized aluminum, black | M8 x 1 |
