Pixhawk 6X Pro Flight Controller
Holybro Pixhawk 6X Pro is the higher-tier module in the modular 6X family: the same Pixhawk Autopilot Bus arrangement, so it carries the processor and sensors and takes its connectors, footprint and mounting from a separately chosen baseboard. Order the baseboard with it.
Key specifications
- Processor
- STM32H753, Cortex-M7, 480 MHz, 2 MB flash, 1 MB RAM
- Autopilot power input
- 6 V maximum
Before you order: Check the interfaces and power input you need, and whether the model is a module that needs a separate baseboard.
- Part number
- 11070
- Type
- Autopilots (PX4 and ArduPilot)
- Manufacturer's range
- Holybro Pixhawk autopilots and baseboards
Includes GST and delivery in India
Imported to order. Lead time confirmed with your quotation.
Request a quotation from your cart. No payment is required to submit.
Specifications
| Model | Pixhawk 6X Pro |
| Manufacturer | Holybro |
| Holybro SKU | 11070 |
| Product type | Flight controller |
| Product line | Pixhawk 6X Pro (separate baseboard required) |
| Category | Autopilot Flight Controllers |
| Processor | STM32H753, Cortex-M7, 480 MHz, 2 MB flash, 1 MB RAM |
| I/ | STM32F103 |
| IMU — ADIS16470 | ±40 g, isolated |
| IMU — IIM-42652 | ±16 g, isolated |
| IMU — ICM-45686 | ±32 g, hard-mounted |
| Magnetometer | BMM150 |
| Barometers | ICP20100, BMP388 |
| Module dimensions | 38.8 x 31.8 x 30.1 mm |
| Module mass | 50 g (module only, excludes the baseboard) |
| PWM outputs (module) | 16 |
| Serial ports (module) | 4 |
| Serial ports with flow control | 3 |
| GPS ports (module) | 2 |
| I2C ports (module) | 1 |
| SPI ports (module) | 1 |
| CAN ports (module) | 2 |
| Ethernet | 100 Mbps |
| Power inputs (module) | 2 |
| Autopilot power input | 6 V maximum |
| USB input | 4.75-5.25 V |
| Servo rail (pass-through, not a supply input) | 0-36 V |
| Interface note | Depends on the baseboard |
| Baseboard | Separate baseboard required |
| Standard | Pixhawk Autopilot Bus module |
Price and supplied configuration
- SKU
11070- Price
- ₹87,562.10
Prices are in rupees. Includes GST and delivery in India. Delivery and returns
What else you need
A baseboard
The Pixhawk 6X Pro is a flight-controller module: it needs a baseboard for its connectors and power input.
Source: Holybro's specification for this module, and the modules each baseboard lists that it takes.
Accessories and compatibility
Compatible accessories
Named by the manufacturer for this part.
Used for
- Research and production aircraft specifying the top of the 6X family, where the redundancy and sensing requirement has been written as an architecture rather than a part number
The manufacturer lists: Pixhawk Standard Baseboard V2A and V2B, Mini Baseboard, Jetson baseboard and RPi CM4 baseboard. Digital I2C power modules such as the PM02D.
Questions buyers ask
Where is the datasheet?
Under Documentation on this page there is a link that searches the manufacturer's site for this part number, where its datasheet and documentation are published. We also send the datasheet and any drawings with your quotation.
Can I return it?
Yes, within 30 days of delivery, if it is unused and in its original packaging. You pay the return shipping, and we refund 90% of the price after checking the part.
Compare with other autopilots (PX4 and ArduPilot)
The manufacturers’ figures for this part and the ones most like it, on the rows they publish. — Not specified
| Product | Processor | Autopilot power input | USB input | Servo rail (pass-through, not a supply input) | Baseboard |
|---|---|---|---|---|---|
| Pixhawk 6X Pro this page | STM32H753, Cortex-M7, 480 MHz, 2 MB flash, 1 MB RAM | 6 V maximum | 4.75-5.25 V | 0-36 V | Separate baseboard required |
| Pixhawk 6X | STM32H753, Cortex-M7, 480 MHz, 2 MB flash, 1 MB RAM | 6 V maximum | 4.75-5.25 V | 0-36 V | Separate baseboard required |
| Pixhawk 6C Aluminum | STM32H743, Cortex-M7, 480 MHz, 2 MB flash, 1 MB SRAM | 6 V maximum | 4.75-5.25 V | 0-36 V | Integrated |
| Pixhawk 6C Mini Model-A | STM32H743, Cortex-M7, 480 MHz, 2 MB flash, 1 MB RAM | 6 V maximum | 4.75-5.25 V | 0-36 V | Integrated |
| Pixhawk 6C Mini Model-B | STM32H743, Cortex-M7, 480 MHz, 2 MB flash, 1 MB RAM | 6 V maximum | 4.75-5.25 V | 0-36 V | Integrated |
| Pixhawk 6C Plastic | STM32H743, Cortex-M7, 480 MHz, 2 MB flash, 1 MB RAM | 6 V maximum | 4.75-5.25 V | 0-36 V | Integrated |
Customer reviews
Not yet rated. No customer reviews yet.
Review this product
Share your thoughts with other customers
Create review
Pixhawk 6X Pro
Bought this part from us? Be the first to review it: your review helps the next buyer choose.