Thrusters

How to choose an underwater thruster for an ROV

How to choose an underwater thruster for an ROV by thrust, voltage, depth rating, ESC, rotation and mounting.

Published 6 August 2026 · revised 29 September 2026 · 3 min read

The short answer

Start from what the vehicle has to do, then check six things: voltage system, thrust in every direction you need, whether the ESC is external or built in, propeller rotation, depth rating, and mounting and cabling. For compact ROVs and student prototypes, Blu-Sub's Z60 family is the usual starting point, with the Z60E when a built-in ESC would simplify the wiring.

  • The Z80's 290 KV version (rated 16 V, 4S) and 170 KV version (24 V, 6S) use different windings and perform differently.
  • Peak forward thrust alone is misleading. Size for forward, reverse and vertical control.
  • Mix clockwise and counter-clockwise propellers so the reaction torques cancel.

Choose a thruster for the whole vehicle: thrust, voltage, rotation, depth rating, control electronics and mounting all depend on each other. Use this guide to write down a specification before you pick a Blu-Sub thruster.

Decide what the vehicle has to do first.

Inspection, research, intervention and student ROVs need different propulsion. Write down where the vehicle will work and what it will carry, then compare thrusters against that.

01 — VEHICLE

Vehicle size and mass

Estimate the dry mass, the buoyancy in water, the payload, and anything that adds drag, such as cameras, manipulators and tether-management hardware.

02 — MANOEUVRING

Thrust and layout

Decide whether the vehicle needs horizontal thrust, vertical heave, vectored thrust, or spare motors for redundancy.

03 — ENVIRONMENT

Depth and water conditions

Note the working depth, water temperature and salinity, and how likely the propellers are to meet weed, debris or sediment.

Six checks before you shortlist a thruster.

01

Voltage system

Match the thruster to the vehicle's power system. The Z80's 290 KV version is rated at 16 V (4S) and runs from 10–16.8 V; the 170 KV version is built for 24 V (6S). They use different windings and perform differently.

02

Thrust requirement

Size the number and type of thrusters from the forward, reverse and vertical control you need. Peak thrust on its own will mislead you.

03

ESC arrangement

Decide whether an external ESC fits your electronics layout, or whether a thruster with the ESC built in would make the wiring simpler.

04

Rotation direction

On a vehicle with several thrusters, specify clockwise and counter-clockwise propellers so the reaction torques cancel and the layout works.

05

Depth rating

Check the pressure rating against the deepest the vehicle will go. A thruster that works in a test tank tells you nothing about depth.

06

Integration details

Check the mounting pattern, cable routing, penetrators, connectors and guard options against your frame and enclosure.

Which Blu-Thrust family to start from.

PlatformTypical selection contextConfiguration question
Blu-Thrust Z60Compact ROVs, diver-propulsion vehicles and student prototypes.Does an external ESC suit your electronics layout?
Blu-Thrust Z60ECompact vehicles where a built-in ESC saves wiring.Would a built-in ESC help this vehicle?
Blu-Thrust Z80-17024V ROVs, USVs and underwater robots that need more thrust.Which propeller rotation and controller layout do you need?
Blu-Thrust Z80 / Z80E-2903S and 4S vehicles that need high thrust (rated at 16 V, 10–16.8 V range).External ESC or built-in ESC?

Send us this and we can recommend a thruster faster.

  • Vehicle type, use case and expected operating depth
  • Required number of thrusters and preferred mounting layout
  • Battery voltage, available current and controller preference
  • Target thrust, or the vehicle mass and payload so we can work it out
  • Quantity and the delivery location in India

Sources.

  • Thrust, voltage, depth rating and ESC configuration figures for the Blu-Thrust Z60 and Z80 ranges, from the manufacturer's published specifications.
  • Thrust figures are quoted at a stated voltage, and change with it.

Published 6 August 2026. Last revised 29 September 2026. Corrections to sales@vebixautomation.com.

Talk to us about your ROV thrusters.

Vebix Automation is an authorised Blu-Sub distributor. We can compare the options for your vehicle and quote for the quantity you need. Ask for a quote.

Compare the parts: Underwater thrusters

More on underwater robotics

All of underwater robotics, question by question →