Underwater connectors, cable penetrators and tethers

Cable penetrators, underwater connectors, subsea cable and ROV tether. Match the bulkhead thread to your end cap and the seal to your cable's diameter, and check each part's own depth rating.

23 products

Cable Jacket Stripper

Blue Robotics

Cable Jacket Stripper

Part number
BR-100429
Earlier part number
WL-CABLE-JACKET-STRIPPER-R1
₹15,991.81

GST and delivery included

Cable Repair Kit

Blue Robotics

Cable Repair Kit

Part number
BR-100883
Earlier part number
TOOL-KIT-CABLE-REPAIR-R1-RP
₹13,622.55

GST and delivery included

Potting Kit (x 10)

Blue Robotics

Potting Kit (x 10)

Part number
BR-100693
Earlier part number
TOOL-POTTING-KIT-R1-RP
₹9,773.60

GST and delivery included

WetLink Assembly Block

Blue Robotics

WetLink Assembly Block

Part number
BR-100686
Earlier part number
WLP-ASSEMBLY-BLOCK-R1-RP
₹11,539.82

GST and delivery included

WetLink Bulkhead Wrench - M06

Blue Robotics

WetLink Bulkhead Wrench - M06

Part number
BR-100977-006
Earlier part number
WL-M06-BULKHEAD-WRENCH-R1-RP
₹10,925.75

GST and delivery included

WetLink Bulkhead Wrench - M10

Blue Robotics

WetLink Bulkhead Wrench - M10

Part number
BR-100977-010
Earlier part number
WL-M10-BULKHEAD-WRENCH-R1-RP
₹10,925.75

GST and delivery included

WetLink Bulkhead Wrench - M14

Blue Robotics

WetLink Bulkhead Wrench - M14

Part number
BR-100977-014
Earlier part number
WL-M14-BULKHEAD-WRENCH-R1-RP
₹11,693.33

GST and delivery included

Showing 23 of 23 products.

How to choose connectors and penetrators

Penetrator or connector

A penetrator is cheaper, smaller and seals the cable permanently. A connector lets you unplug a thruster or sensor to service it. Our guide compares the two by cost, depth and maintenance.

Penetrator vs connector →

Thread first, then cable diameter

The thread (M6, M8, M10 or M14 here) must match the hole in your end cap. The seal must match the cable's outer diameter: a seal made for a thicker cable will leak.

Wet-mate is a separate rating

A connector rated for depth is not necessarily rated to be plugged in under water. Unless the manufacturer says it can be mated wet, connect it dry.

Questions buyers ask

Are these connectors wet-mateable?

Not by default. Treat every connector here as dry-mate unless its product page quotes the manufacturer rating it for mating under water.

Does a penetrator's depth rating cover the whole cable entry?

It covers the penetrator installed as the manufacturer describes, with the specified seal on the specified cable diameter. The end cap it threads into and the cable itself have their own limits.